# Meshy.ai reports Make Printable cuts failed prints from 44% to 8% in benchmark

> In a study with UMass Amherst, Meshy.ai's Make Printable feature reduced major print defects on a Bambu Lab A1 printer from 44% to 8% for a set of hard‑to‑print prompts.

Oossa · 2026-11-13 · https://oossa.com/en/meshy-ai-reports-make-printable-cuts-failed-prints-from-44-to-8-in-benchmark

Meshy.ai published a printability benchmark done with the ADDFab lab at UMass Amherst. The test printed 125 parts from 25 challenging prompts on six Bambu Lab A1 FDM printers. Using Meshy 7 alone, 11 of 25 prints (44%) had major missing features. With Meshy 7 plus the new Make Printable feature, only 2 of 25 prints (8%) showed such defects. The study also found that 23 of 25 prints (92%) were defect‑free with Make Printable, compared with lower rates for three competing AI generators.

## The facts

- Failed prints dropped from 44% (11 of 25) to 8% (2 of 25) when using Make Printable.
- 92% of prints (23 of 25) were defect‑free with Make Printable, versus 84%‑60% for other AI tools.

## Why it matters

For hobbyists and small businesses, Make Printable can save hours of manual model repair before 3D printing.

## Sources & references

1. [Same Prompt, More Complete Prints: Meshy.ai Publishes Printability Benchmark for AI-Generated 3D Models](https://www.prnewswire.com/news-releases/same-prompt-more-complete-prints-meshyai-publishes-printability-benchmark-for-ai-generated-3d-models-302938840.html) – PR Newswire RSS, 2026-11-13

Last updated: 2026-11-13